Parts Washers, Built in Milwaukee Since 1971

Build-All manufactures parts washers for industrial, automotive and municipal shops — solvent and aqueous, benchtop to 150 gallons, standard models and built-to-order machines. Everything ships from our own floor in Milwaukee, Wisconsin, and has done for over fifty years.

Solvent, aqueous, or something we build for you

Solvent parts washers clean with petroleum-based solvent at room temperature. Fast on grease and oil, parts come out dry, no rinse stage. Aqueous parts washers clean with heated water and detergent — low VOC, no flash point, nothing flammable stored in the building. If you are weighing the two, our solvent vs. aqueous comparison works through it properly.

Want the machine to do the scrubbing? Agitating and immersion parts washers move parts through the bath so nobody stands at a tank with a brush. Need something the catalog does not cover? We have been building custom parts washers to customer specification for decades.

Not sure what you need?

Start with the parts washer buying guide for sizing, browse the full range in industrial parts washers, or watch the machines actually running in our video library — thirty demonstrations filmed on our own floor.

Or skip all that and tell us what you need to clean. Describe the parts, the volume and the space you have. We will tell you which machine fits, including when the honest answer is a smaller one.

Keeping it running

A washer is a machine with consumables. We stock replacement pumps, filters, hoses and brushes, fusible links, drums, baskets and cleaning chemicals — for our machines and for other manufacturers’ units too.

Cleaning strips the oil film that was protecting the metal, so freshly washed steel can flash-rust the same day. We stock rust preventatives, and our sister company Solvent Recycling Systems supplies Cortec VpCI corrosion control for holding parts between operations.

Find the right parts washer or parts cleaner

Washer type Capacity Starting at
Benchtop parts washer (BCR-15) 5 gal $385
Sink-on-drum parts washers 16–30 gal drum $798
Brake washers 5 gal and up $867
Air-powered immersion cleaners 6–16 gal $1,050
Base-mounted parts washers 30 gal base $1,579
Recirculating soak tanks (RTFB) 32–60 gal $1,599
Aqueous parts washers, heated stainless 32–60 gal $4,268
Agitating parts washers 80–150 gal $7,467
Custom parts washers Any size Quoted

Why buy from the manufacturer

When you buy a Build-All, you are buying from the shop that welded it. That means three things. You talk to people who know the machine, not a call center. Replacement pumps, filters, hoses and fire-cover links are on the shelf in Milwaukee, so a $200 filter keeps a washer running for twenty years. And you own the washer outright. Most shops that rent a parts washer through a service contract pay for the machine several times over. Our owning vs. renting guide does the math.

Every solvent washer we build has a fusible-link fire cover as standard and is made from heavy-gauge steel for daily use in fleet garages, machine shops, municipal maintenance and production plants.

Parts washer questions

What is a parts washer or parts cleaner?

A parts washer, also called a parts cleaner, is a tank, sink or cabinet that cleans grease, oil and dirt off mechanical parts. Most use a pump to recirculate cleaning fluid through a brush or hose, then let the dirt settle out in a reservoir so the fluid can be reused.

How much does a parts washer cost?

Ours start at $385 for a benchtop unit. A sink-on-drum or base-mounted shop washer runs $800–$2,100, and heated stainless aqueous and agitating washers run $4,000–$7,500. Custom machines are quoted.

What solvent goes in a parts washer?

Use a petroleum-based parts washer solvent with a high flash point. Ours is 153°F and ships ground. Aqueous washers use a water-based degreaser instead.

Solvent or aqueous?

Solvent is fastest on oil and grease, and parts come out dry. Aqueous is the choice when VOC limits, fire codes or operator safety rule out solvent. See solvent parts washers and aqueous parts washers.

Do you sell parts for other brands of washers?

Yes. Our pumps, filters, brushes and fusible links fit many other manufacturers’ machines. Send us your model and we will confirm the fit.