Description
300 GPH Solvent Pump for Parts Washers
This 300 GPH submersible solvent pump is the replacement recirculating pump for Build-All solvent parts washers. It delivers 300 gallons per hour at 1′ of lift with an 11.8′ shut-off, which is plenty of flow for heavy-duty parts cleaning at the brush or hose. It runs on standard 115V/60Hz power.
Specifications
- Flow: 300 GPH at 1′; shut-off at 11.8′
- Type: submersible recirculating pump for petroleum-based parts washer solvent
- Power: 115V / 60Hz
- Model: Little Giant 2E-N (14616)
- Fits: Build-All STD-32, SUP48 and SXL48 parts washers and RTFB solvent tanks, including our 40-gallon solvent tank parts washer
Little Giant 2E-N 14616 300gph Manual
Choosing a replacement parts washer pump
The pump is what turns a tank of solution into a working parts washer. When a washer stops circulating, or the stream at the brush goes weak, the pump is the usual cause — and replacing it costs a fraction of replacing the machine.
Match the flow rate to the tank. A benchtop or drum-mounted unit runs happily on a lower flow rate; a large base-mounted or agitation tank wants more. And do not move a pump between chemistries — seals and impeller materials are specified differently for solvent and for heated aqueous solution, and the wrong one fails early.
See all replacement pumps. While the pump is out, check filtration — circulating grit is the most common reason a pump wears out ahead of schedule — and the hose and flow-through brush, since a blocked brush makes a healthy pump look faulty. Send us your model number if you are unsure which pump you need.
Solvent Pump FAQs
Can I use this solvent pump in an aqueous parts washer?
No. Solvent pumps and aqueous pumps use different seals and impeller materials, and the wrong one fails early. For water-based washers, see our aqueous pumps in replacement pumps.
How do I know if my parts washer pump is bad?
If the washer stops circulating or the stream at the brush goes weak, check the brush and hose for a blockage first, then the filter. If both are clear and the flow is still weak, the pump is usually the cause, and replacing it costs a fraction of a new washer.
Will it fit a parts washer from another brand?
Many sink-on-drum and tank parts washers use a similar submersible pump. Send us your model number and we’ll confirm the right pump before you order. Parts ship by UPS from Milwaukee.




